Theory of chemical bonds in metalloenzymes XXII: a concerted bond-switching mechanism for the oxygen–oxygen bond formation coupled with one electron transfer for water oxidation in the oxygen-evolving complex of photosystem II

ABSTRACT

QM(UB3LYP)/MM(AMBER) calculations were performed for the locations of the transition structure (TS) of the oxygen–oxygen (O–O) bond formation in the S₄ state of the oxygen-evolving complex (OEC) of photosystem II (PSII). The natural orbital (NO) analysis of the broken-symmetry (BS) solutions was also performed to elucidate the nature of the chemical bonds at TS on the basis of several chemical indices defined by the occupation numbers of NO. The computational results revealed a concerted bond switching (CBS) mechanism for the oxygen–oxygen bond formation coupled with the one-electron transfer (OET) for water oxidation in OEC of PSII. The orbital interaction between the σ-HOMO of the Mn(IV)₄–O₍₅₎ bond and the π*-LUMO of the Mn(V)₁=O₍₆₎ bond plays an important role for the concerted O–O bond formation for water oxidation in the CaMn₄O₆ cluster of OEC of PSII. One electron transfer (OET) from the π-HOMO of the Mn(V)₁=O₍₆₎ bond to the σ*-LUMO of the Mn(IV)₄–O₍₅₎ bond occurs for the formation of electron transfer diradical, where the generated anion radical [Mn(IV)₄–O₍₅₎]^-? part is relaxed to the ?Mn(III)₄?…?O₍₅₎^- structure and the cation radical [O₍₆₎=Mn(V)₁]⁺ ? part is relaxed to the ⁺O₍₆₎–Mn(IV)₁? structure because of the charge-spin separation for the electron-and hole-doped Mn–oxo bonds. Therefore, the local spins are responsible for the one-electron reductions of Mn(IV)₄->Mn(III)₄ and Mn(V)₁->Mn(IV)₁. On the other hand, the O₍₅₎^- and O₍₆₎⁺ sites generated undergo the O–O bond formation in the CaMn₄O₆ cluster. The Ca(II) ion in the cubane- skeleton of the CaMn₄O₆ cluster assists the above orbital interactions by the lowering of the orbital energy levels of π*-LUMO of Mn(V)₁=O₍₆₎ and σ*-LUMO of Mn(IV)₄–O₍₅₎, indicating an important role of its Lewis acidity. Present CBS mechanism for the O–O bond formation coupled with one electron reductions of the high-valent Mn ions is different from the conventional radical coupling (RC) and acid-base (AB) mechanisms for water oxidation in artificial and native photosynthesis systems. The proton-coupled electron transfer (PC-OET) mechanism for the O–O bond formation is also touched in relation to the CBS-OET mechanism.     

The maximum multiplicity of the largest k-th eigenvalue in a matrix whose graph is acyclic or unicyclic

Given a graph $G$ we are interested in studying the symmetric matrices associated to $G$ with a fixed number of negative eigenvalues. For this class of matrices we focus on the maximum possible nullity. For trees this parameter has already been studied and plenty of applications are known. In this work we derive a formula for the maximum nullity and completely describe its behavior as a function of the number of negative eigenvalues. In addition, we also carefully describe the matrices associated with trees that attain this maximum nullity. The analysis is then extended to the more general class of unicyclic graphs. Further our work is applied to re-describing all possible partial inertias associated with trees, and is employed to study an instance of the inverse eigenvalue problem for certain trees.     

Contrasting Effect of Additives on Photoinduced Reactions of SmI2

The work described herein compares the effect of additives (HMPA, methanol, ethylene glycol, pinacol, N-methylethanolamine) on thermal and photochemical reactions of samarium diiodide (SmI₂). In thermal reactions, additives that coordinate to SmI₂ induce a significant increase in reaction rate. In photochemical reactions, the presence of an electronegative atom with a highly localized negative charge on the substrate leads to a rate deceleration. In order to benefit from the columbic interaction with the positively charged samarium cation, these substrates react preferentially by an inner sphere reduction mechanism. The addition of ligands prevents this close interaction causing rate retardation. Furthermore, studies demonstrate that excited state quenching of Sm^II by ethylene glycol and other additives indicate that it is unlikely to be the major cause for the observed rate retardation. This effect provides a simple diagnostic tool to distinguish between an inner and an outer sphere reduction mechanism.     

Oxidative dehydrogenation of n-octane over a vanadium–magnesium oxide catalyst: Influence of the gas hourly space velocity

Oxidative dehydrogenation (ODH) of n-octane was carried out over a vanadium–magnesium oxide catalyst in a continuous flow fixed bed reactor. The catalyst was characterized by ICP–OES, powder XRD and SEM. The catalytic tests were carried out at different gas hourly space velocities (GHSVs), viz. 4000, 6000, 8000, and 10,000 h^?1. The best selectivity for octenes was obtained at the GHSV of 8000 h^?1, while that for C8 aromatics was attained at the GHSV of 6000 h^?1 at high temperatures (500 and 550 °C). The catalytic testing at the GHSV of 10,000 h^?1 showed the lowest activity, while that at the GHSV of 4000 h^?1 consistently showed the lowest ODH selectivity. Generally, the best ODH performance was obtained by the catalytic testing at the GHSVs of 6000 and 8000 h^?1. No phasic changes were observed after the catalytic testing.     

New lower bounds on the radius of spatial analyticity for the KdV equation

The radius of spatial analyticity for solutions of the KdV equation is studied. It is shown that the analyticity radius does not decay faster than $t^{?1/4}$ as time t goes to infinity. This improves the works of Selberg and da Silva (2017) [30] and Tesfahun (2017) [34]. Our strategy mainly relies on a higher order almost conservation law in Gevrey spaces, which is inspired by the I-method.     

Preparation,structure elucidation,and antioxidant activity of new bis(thiosemicarbazone) derivatives

Schiff-base–bearing new bis(thiosemicarbazone) derivatives were prepared from terephthalaldehyde and various thiosemicarbazides. FT–IR, ¹H NMR, ¹³C NMR, and UV–Vis spectroscopic methods and elemental analysis were used to elucidate the identification of the synthesized molecules. The in vitro antioxidant activity of the synthesized compounds was analysed with the 1,1-diphenyl-2-picryl hydrazyl free-radical–trapping process. The synthesized compounds exhibited lower antioxidant activity than the standard ascorbic acid. IC₅₀ values of the synthesized molecules measured from 3.81 ± 0.01 to 29.05 ± 0.11 μM. Among the synthesized compounds, compound 3 had the best antioxidant activity. Moreover, this study explained the structure–activity relationship of the synthesized molecules with different substituents in radical trapping reactions.     

Distinguishability and Disturbance in the Quantum Key Distribution Protocol Using the Mean Multi-Kings’ Problem

We introduce a quantum key distribution protocol using mean multi-kings’ problem. Using this protocol, a sender can share a bit sequence as a secret key with receivers. We consider a relation between information gain by an eavesdropper and disturbance contained in legitimate users’ information. In BB84 protocol, such relation is known as the so-called information disturbance theorem. We focus on a setting that the sender and two receivers try to share bit sequences and the eavesdropper tries to extract information by interacting legitimate users’ systems and an ancilla system. We derive trade-off inequalities between distinguishability of quantum states corresponding to the bit sequence for the eavesdropper and error probability of the bit sequence shared with the legitimate users. Our inequalities show that eavesdropper’s extracting information regarding the secret keys inevitably induces disturbing the states and increasing the error probability.     

小直径棒材超声横波检测仿真分析

采用超声水浸聚焦斜入射方式进行小棒材表面、近表缺陷检测时,声波在水/棒和棒/缺陷界面会发生反射、折射、散射、衍射及波形转换等一系列物理变换。此时缺陷可检性对声波入射条件十分敏感,常出现由于检测条件设置不当而导致缺陷漏检、误检的情况。为解决这一问题,本文针对小棒材超声斜入射检测中的主要参数——入射角和水距,开展声场及缺陷声响应仿真,研究检测参数对不同部位缺陷检测能力的影响,并对仿真结果进行试验验证。通过研究得到了检测水距、入射角度对缺陷检测能力的影响,并得到最优检测条件。试验验证结果表明研究制定的检测方案可有效检测出表面、近表面裂纹缺陷。